Kia Sportage: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Back View Camera System / Repair procedures

Removal

1.	Remove the tailgate trim in the trunk after removing the screws and clips. (Refer to the BD group - "Tailgate")

2.	Remove the tailgate garnish (A) after disconnecting the connector and removing the bolts.

3.	Remove the back view camera (A) after loosening the screws (2EA).

Installation

1.	Install the back view camera.

2.	Install the tailgate garnish and trim.

Description and Operation

Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the ...

Heating,Ventilation, Air Conditioning

...

Other Information:

Heating and air conditioning
1.Start the engine. 2.Set the mode to the desired position. For improving the effectiveness of heating and cooling; - Heating: - Cooling: 3.Set the temperature control to the desired position. ...

Schematic Diagrams
Circuit Diagram - ESC(1) Circuit Diagram - ESC(2) Circuit Diagram - ESC(3) ESC connector input/output Connector TerminalSpecificationRemarkNoDescription29IGNITION1(+)High level of wake up vol ...

Kia Sportage: Repair procedures

Description and Operation

Heating,Ventilation, Air Conditioning

Other Information:

Categories