Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad") |
3. |
Remove the crash pad side switch assembly (A) after loosening 2 screws.
|
4. |
Remove the side crash pad switch after disconnecting the connectors (A). |
5. |
Operate the switch and check for continuity between terminals with an ohmmeter. |
Components and Components Location
Components
1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring4. Seat Belt Pretensioner (BPT)5. Pressure Side Impact Sensor (P-SIS)6. Side Impact Sensor (SIS)7. Side Airbag (SAB)8. Passenger A ...
Climate Control Air Filter: Repair procedures
Replacement
1.
Disconnect the damper (B) and glove box lift (C) from the glove box (A).
2.
Remove the filter cover with pushing the knob.
3.
Replace the air filter (B), install it after ma ...