Kia Sportage: Seat Belt Buckle Switch (BS): Description and Operation
The SRSCM shall monitor the status of the driver and front
passenger seat belt buckle. The SRSCM provides one pin each for the
driver and front passenger seat belt buckle status input. The seat belt
buckle circuit operates from internal boost voltage supplied by the
SRSCM, and uses chassis ground for the signal return. The buckle status
shall modify the SRSCM deployment. If the buckle status is unbuckled,
the corresponding pretensioner will not be deactivated.
Removal
Pressure Side Impact Sensor
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before ...
Other Information:
Fuel Pressure Control Valve: Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel ...
Intercooler: Components and Components Location
Components
1. Recirculation hose2. Intercooler inlet hose & pipe assembly3. Intercooler outlet hose & pipe assembly4. Intercooler mounting bracket5. Intercooler upper mounting insulator6. ...