Removal |
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Remove the front seat assembly. (Refer to the Body group- Front seat) |
3. |
Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch. |
Installation |
Be sure to install the harness wires not to be pinched or interfered with other parts. |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
3. |
Install the seat belt buckle switch.
|
4. |
Install the front seat assembly. . (Refer to the Body group- Front seat) |
5. |
Reconnect the battery negative cable. |
6. |
After installing the seat belt buckle switch, confirm proper system operation:
|
Front Wheel Speed Sensor: Repair procedures
Removal
1.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
2.
Remove the front wheel guard .
3.
Disconnect ...
Interior light
Do not use the interior lights for extended periods when the engine is not running.
It may cause battery discharge.
WARNING - Interior light
Do not use the interior lights when driving in the d ...