Removal |
1. |
Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. |
2. |
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pins (A) as arrow direction. And then remove the seat
belt after pushing the lock pin (B). |
3. |
Remove the following parts. (Refer to the Body group- Interior trim)
|
4. |
Remove the upper anchor bolt. |
5. |
Disconnect the seat belt pretensioner connector (A). |
6. |
Loosen the seat belt pretensioner mounting bolt (B,C) and remove the seat belt pretensioner. |
Installation |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least thirty seconds. |
3. |
Install the seat belt pretensioner (BPT) with a bolt.
|
4. |
Connect the seat belt pretensioner (BPT) connector. |
5. |
Install the upper anchor bolts.
|
6. |
Install the following parts. . (Refer to the Body group- Interior trim)
|
7. |
Insert the seat belt to the anchor pretensioner. |
8. |
Reconnect the battery negative cable. |
9. |
After installing the seat belt pretensioner (BPT), confirm proper system operation:
|
26 Brake Control Solenoid Valve(26/B_VFS): Specifications
Specifications
Direct control VFS[26/B]
? Control type : Normal low type
Control Pressure kpa (kgf/cm?, psi)9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal resist ...
Air bag - advanced supplemental restraint system
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side impact air bag
(4) Curtain air bag
Even in vehicles with air bags, you and your passengers must always wear the
safety belts p ...