Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the gear knob. Remove the floor console upper cover (A) using the appropriate tool.
(Refer to BD group - "Console") |
3. |
Remove the floor console tray (A).
|
4. |
Disconnect the driver / assist seat heater switch connector.
Driver [Heater]
Driver [Ventilation + Heater]
Assist [Heater]
|
5. |
Operate each seat heater switch and check that continuity exists between the terminals.
[Heater]
Driver [Ventilation + Heater]
Driver [Ventilation + Heater] |
6. |
Inspect the switch pin. If needed, replace the seat heater switch (A) after loosening the screws (3EA). |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the power window switch from the rear door trim.
(Refer to BE group - "Power window switch")
|
3. |
Inspect the switch pin. If needed, replace the seat heater switch. |
Components and Components Location
Component Location
1. Back view camera2. ECM mirror
...
Temperature control
The temperature control knob allows you to control the temperature of the air
flowing from the ventilation system. To change the air temperature in the passenger
compartment, turn the knob to th ...