Inspection |
1. |
Check the damage and operation of the control cable. |
2. |
Check the damage of the boot. |
3. |
Check the damage and corrosion of the bushing. |
4. |
Check the damage or weakening of the spring. |
Removal |
1. |
Remove the center console assembly.
(Refer to "Interior(console)" in BD group.) |
2. |
Take off the clip (A) and then remove the shift cable (B). |
3. |
Remove the shift cable assembly in the vehicle after removing the nuts (B) and the retainer (A).
|
4. |
Remove the air duct (A). |
5. |
Remove the air cleaner assembly.
|
6. |
Remove the battery and battery tray.
(Refer to "Charging system" in EE group.) |
7. |
Remove the shift cable (A).
|
8. |
Remove the shift cable inside of cab. |
Installation |
When installing, set room side shift lever and T/M side lever to "N" position. |
1. |
Install in the reverse order of removal. |
Steering wheel audio controls
Type A
Type B
The steering wheel may incorporate audio control buttons.
✽ NOTICE
Do not operate audio remote control buttons simultaneously.
Driving while distracted is dangerous and s ...
Indicator light
When the ignition switch is turned ON, the indicator light illuminates, then
goes off if ESC system is operating normally.
The ESC indicator light blinks whenever ESC is operating and illuminates ...