Removal |
The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag. |
1. |
Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. |
2. |
Remove the front seat assembly. (Refer to the Body group- Seat) |
3. |
Remove the seat back assembly. (Refer to the Body group- Seat) |
Installation |
Be sure to install the harness wires not to be pinched or interfered with other parts. |
|
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least thirty seconds. |
3. |
Install the new seat back assembly.
(Refer to the Body group - Seat) |
4. |
Install the front seat assembly.
(Refer to the Body group - Seat) |
5. |
Recline and slide the front seat forward fully, make sure the harness wires are not pinched of interfering with other parts. |
6. |
Reconnect the battery negative cable. |
7. |
After installing the side airbag (SAB), confirm proper system operation:
|
Repair procedures
Inspection
Self Diagnosis With Scan Tool
Smart key system defects can be quickly diagnosed with the
GDS. GDS operates actuator quickly to monitor, input/output value and
self diagnosis.
The f ...
Repair procedures
Adjustment
TCM Learning
When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
...