Smart Key |
1. |
Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. |
2. |
Select the vehicle model and then do "Smart key code saving". |
3. |
After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below. |
4. |
After inserting the teaching key, push "ENTER" key. |
5. |
Input the "Pin code" for first key teaching. |
6. |
Confirm the message "First key teaching completed". |
7. |
Input the "Pin code" for second key teaching. |
8. |
Confirm the message "Second key teaching completed". |
9. |
Then the screen will be shown as below when key teaching process is completed. |
Components and Components Location
Component Location (1)
1. Buzzer2. Smart key unit3. RF receiver4. Interior antenna 15. Interior antenna 26. Interior antenna 37. Bumper antenna
Component Location (2)
1. Door outside hand ...
Specifications
Specifications
Purge Control Solenoid Valve (PCSV)
? Specification
ItemSpecificationCoil Resistance (?)19.0 ~ 22.0 [20°C(68°F)]
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive Pr ...