Specifications |
Items | Specifications | |
Ignition coil | Primary resistance | 0.62 ± 10 % (?) |
Secondary resistance | 7.0 ± 15 % (k?) | |
Spark plugs | Type | ZXU20HCR8 |
Gap | 0.7 ~0.8 mm (0.0276 ~ 0.0315 in.) |
Items | Specifications | ||
Starter | Rated voltage | 12V, 1.2kW | |
No. of pinion teeth | 11 | ||
No-load characteristics | Voltage | 11.5V | |
Ampere | 105A, MAX | ||
Speed | 2,950rpm, MIN |
Items | Specifications | ||
Alternator | Type | Battery voltage sensing | |
Rate voltage | 13.5 V, 130A | ||
Speed in use | 1,000 ~ 18,000 rpm | ||
Voltage regulator | IC regulator built-in type | ||
Regulator setting voltage | External mode | ECU control | |
Internal mode | 14.55 ± 0.3V | ||
Temperature compensation | External mode | ECU control | |
Internal mode | -7 ± 2mV / °C | ||
Battery | Type | 54-26GL | |
Cold cranking amperage [at -18°C(-0.4°F)] | 600A | ||
Reserve capacity | 113min | ||
Specific gravity [at 25°C(77°F)] | 1.280 ± 0.01 |
|
|
Rail Pressure Sensor (RPS): Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe
and measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in ...
Seat Heater Switch: Repair procedures
Inspection
Driver / Assist seat
1.
Disconnect the negative (-) battery terminal.
2.
Remove the gear knob. Remove the floor console upper cover (A) using the appropriate tool.
(Refer to BD g ...