Removal |
Take care not to damage and scratch the hazard lamp switch assembly and its related parts.
Apply the protective tapes to the hazard lamp switch assembly and its related parts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad passenger''s garnish (A).
(Refer to BD group - "Crash pad") |
3. |
Disconnect the connectors and remove the cluster fascia panel (A).
(Refer to BD group - "Crash pad") |
4. |
Remove the center fascia panel (A) after loosening the mounting screw (2EA). |
5. |
Disconnect the connector (A) installed on the center fascia panel. |
6. |
Remove the AVN assembly (A) after loosening the mounting screw (4EA). |
7. |
Disconnect the AVN connectors (A) and cable, then remove the AVN unit completely.
|
Installation |
1. |
Connect the AVN head unit connectors and cable. |
2. |
Install the AVN head unit. |
3. |
Install the center fascia panel. |
4. |
Install the cluster fascia panel. |
5. |
Install the crash pad passenger''s garnish. |
6. |
Connect the negative (-) battery terminal.
|
Output Speed Sensor: Schematic Diagrams
Circuit Diagram
...
For best battery service
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or terminal grease.
Rinse any spille ...