Kia Sportage: Body Control Module (BCM): Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / BCM (Body Control Module) / Body Control Module (BCM): Specifications

Specifications

Electrical Performance

Item	Requirement	Remark
Rated voltage	DC 12V
Operating voltage range	DC 9 ~ 16V	Shall activate normally in these range
Operating temperature range	-30°C ~ +80°C	Shall conserve normally in these range.
Storage temperature range	-40°C ~ +85°C	Shall conserve normally in these range.
Max humidity in use	95%
High voltage resistance	24V/1min, 18V/1hour	After overvoltage is the Normal behavior
Insulation resistance	100M? or more (measured with 500V MEGGER)	Specify as well as parts that insulation like PCB, moisture-proof COATING is required.
Quiescent current	KEYLESS spec : 6mA or less SMK spec : 5.5mA or less NON-KEYLESS : 4mA or less	Measure when the state, all output loads are OFF and there are no Input SW(including TX operation) changes, continues 2sec.
Voltage drop	1.2V or less	but, Terminal B9, B20, C1, C2, C3, C13, C14, C15, C16 is 2.0V or less.

BCM (Body Control Module)

...

Body Control Module (BCM): Schematic Diagrams

Circuit Diagram ...

Other Information:

Air cleaner
Filter replacement It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air. Repla ...

Rear Stabilizer Bar: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage to the hub bol ...

Kia Sportage: Body Control Module (BCM): Specifications

BCM (Body Control Module)

Body Control Module (BCM): Schematic Diagrams

Other Information:

Categories