Inspection |
1. |
There should be continuity between the No.11 in the A and
No.12 in the A terminals when power and ground are connected to the No.2
in the A and No.11 in the A terminals. |
2. |
There should be no continuity between the No.11 in the A and No.12 in the A terminals when power is disconnected. |
1. |
There should be continuity between the No.3 in the A and No.8
in the A terminals when power and ground are connected to the No.5 in
the A and No.6 in the A terminals. |
2. |
There should be no continuity between the No.3 in the A and No.8 in the A terminals when power is disconnected. |
1. |
There should be continuity between the No.17 in the A and
No.18 in the A terminals when power and ground are connected to the
No.16 in the A and No.17 in the A terminals. |
2. |
There should be no continuity between the No.17 in the A and No.18 in the A terminals when power is disconnected. |
Underdrive Brake Control Solenoid Valve(UD/B_VFS): Specifications
Specifications
Direct control VFS[UD/B]
? Control type : Normal high type
Control Pressure kpa (kgf/cm?, psi)500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Internal resis ...
PDM Relay Box: Description and Operation
Description
The PDM relay (A) is united with IG1, IG2 and ACC relays and installed in the lower center fascia panel. ...