Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console assembly.
(Refer to BD group - "Console") |
3. |
Remove the PDM relay box (A) after loosening the bolts (2EA) and disconnecting the connector. |
Installation |
1. |
Install the PDM relay box. |
2. |
Install the floor console assembly. |
3. |
Connect the battery (-) cable. |
Inspection |
1. |
There should be continuity between the No.1 and No.2
terminals in the B connector when power and ground are connected to the
No.3 and No.4 terminals in the A connector. |
2. |
There should be no continuity between the No.1 in the B and No.2 terminals in the B terminals when power is disconnected. |
1. |
There should be continuity between the No.7 and No.8
terminals in the A connector when power and ground are connected to the
No.3 and No.10 terminals in the A connector. |
2. |
There should be no continuity between the No.7 in the A and No.8 terminals in the A terminals when power is disconnected. |
1. |
There should be continuity between the No.7 and No.6
terminals in the A connector when power and ground are connected to the
No.1 and No.3 terminals in the A connector. |
2. |
There should be no continuity between the No.7 in the A and No.6 terminals in the A terminals when power is disconnected. |
Luggage net holder
To keep items from shifting in the cargo area, you can use the holders located
in the cargo area to attach the luggage net.
If necessary, contact your authorized Kia dealer to obtain a luggage ...
Front Stabilizer Bar: Components and Components Location
Components
1. Stabilizer bar2. Stabilizer link3. Sub frame
...