Inspection |
1. |
Disconnect the negative battery terminal. |
2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
3. |
Disconnect the switch connector (16 pins) from wiring harness. |
4. |
Check for continuity between the terminals. If needed, replace the switch. |
Removal |
1. |
Disconnect the negative battery terminal. |
2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
3. |
Remove the screws from power window switch (A) and connectors (B). |
4. |
Remove the driver power window switch (A) from front door trim.
|
Installation |
1. |
Install the power window switch and connectors. |
2. |
Install the front door trim. |
Seat Belt Pretensioner (BPT): Components and Components Location
Components
...
Change to "winter weight" oil if necessary
In some climates it is recommended that a lower viscosity "winter weight" oil
be used during cold weather. See section 8 for recommendations. If you aren't sure
what weight oil you s ...