Kia Sportage: Power Door Mirror Switch: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Power Door Mirrors / Power Door Mirror Switch: Repair procedures
| Removal |
Driver Door Mirror Switch
| 1. |
Disconnect the negative battery terminal. |
| 2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
| 3. |
Remove the screws from power window switch (A) and connectors (B).
|
| 4. |
Remove the driver power window switch (A) from front door trim.
|
| Installation |
Driver Door Mirror Switch
| 1. |
Install the driver power window switch and connectors. |
| 2. |
Install the front door trim. |
| Inspection |
| 1. |
Remove the front door trim and power door mirror switch module (A).
|
| 2. |
Check for the continuity between terminals of power door mirror switch according to the table.
|
Power Door Mirror Switch: Schematic Diagrams
Circuit Diagram
...
Power Door Mirror Actuator: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door delta cover.
(Refer to the BD group - "Front door")
3.
Disconnect the connector from the door mirror.
...
Other Information:
Steering Angle Sensor: Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor
Driven Power Steering) and it sends messages to HECU through CAN
communication line.
The SAS is used to determine turnin ...
Air bag non-inflation conditions
• In certain low-speed collisions the air bags may not deploy. The air bags are
designed not to deploy in such cases because they may not provide benefits beyond
the protection of the seat belts ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024