Inspection |
1. |
Remove (-) negative battery terminal. |
2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
3. |
Disconnect the connector from the motor.
(A : Safety, B : Standard) |
4. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor.
[Standard] |
5. |
Connect the terminal No. 2 and No. 3 to battery voltage (12V)
and check that the motor operates smoothly when connecting the
terminals below.
[Safety] |
1. |
Remove (-) negative battery terminal. |
2. |
Remove the rear door trim.
(Refer to the BD group - "Rear door") |
3. |
Disconnect the connector from the motor. |
4. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor. |
Components and Components Location
Components Location
[Vehicle Components]
1. Automatic transaxle2. Transaxle control module (TCM)3. Shift lever4. DLC
[Transaxle Components]
1. Input speed sensor2. Output speed sensor3. So ...
Instrument Cluster: Components and Components Location
Components
...