Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the center fascia panel.
(Refer to BE - "Audio") |
3. |
Remove the heater and A/C controller (A) after disconnecting the connector (B).
|
Installation |
1. |
Install the heater and A/C controller. |
2. |
Install the center fascia panel. |
Inspection |
1. |
The windshield deicer switch inputs can be checked using the GDS. |
2. |
To check the input value of windshield deicer switch, select option "BCM". |
3. |
Select option "Current Data". |
4. |
To check the input value of windshield deicer switch in force mode, select option. |
Body Control Module (BCM): Specifications
Specifications
Electrical Performance
ItemRequirementRemarkRated voltageDC 12VOperating voltage rangeDC 9 ~ 16VShall activate normally in these rangeOperating temperature range-30°C ~ +80°CShall ...
With central door lock switch
Driver’s door
Passenger’s door
Operate by pressing the central door lock switch.
When pressing the front portion (1) of the switch, all vehicle doors will
lock.
When pressing the rear p ...