Inspection |
1. |
Turn the ignition key to the "ON" position. |
2. |
Cover the forward facing sensor. |
3. |
Head a light to the rearward looking sensor. |
4. |
The ECM should be darkened as soon as the rearward looking sensor detects the light.
|
5. |
When the reverse gear is engaged, the ECM should not be darkened.
When heading lights to both the forward facing and rearward looking sensors, the ECM should not be darkened. |
Removal |
1. |
Remove the mirror wiring cover (A). |
2. |
Remove the mirror mounting screw (A) and connector (B). |
3. |
Remove the mirror (A) pulling up in the arrow direction.
|
Installation |
1. |
Install the mirror making sure the mounting bracket not to be damaged. |
2. |
Install the mirror wiring cover after reconnecting the connector and tightening the screw. |
Roller blind
The roller blinds are installed inside of the sunroof and glass roof.
Open or close the roller blind manually using the handle (1) when you need to.
Before opening or closing the sunroof, open the ...
Mode selection
The mode selection buttons control the direction of the air flow through the
ventilation system.
Air can be directed to the floor, dashboard outlets, or windshield. Five symbols
are used to rep ...