Inspection |
1. |
Check the handsfree remote control switch for resistance between No.3 and No.4 terminals in each switch position.
[Call + Hang Up]
[Voice]
|
Removal |
1. |
Remove the driver airbag module.
(Refer to the RT group - "Airbag module") |
2. |
Remove the steering wheel.
(Refer to the ST group - "Steering column and shaft") |
3. |
Remove the steering lower bezel (A) after loosening 2 screws and connector (B). |
4. |
Remove the handsfree remote control switch. |
Installation |
1. |
Install the handsfree remote switch to the steering wheel bezel. |
2. |
Install the steering wheel and bezel. |
3. |
Reconnect the handsfree remote control switch connector and airbag connectors.
|
4. |
Install the driver airbag module. |
Camshaft Position Sensor (CMPS): Troubleshooting
Wave Form
...
Driver's and passenger's front air bag
Driver’s front air bag
Passenger’s front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver and passenger seati ...