Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear bumper.
(Refer to BD group - "Rear Bumper") |
3. |
Disconnect the connector. Remove the rear turn signal lamp (A) after loosening 5 screws. |
4. |
Replace the bulb (A) of rear turn signal lamp.
? If replacing the bulb only, you could work it without removing the rear bumper. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the mirror from the mirror holder.
Be careful not to damage to the clip. |
3. |
Remove the door mirror turn signal lamp (A) after disassembling screw and connector. |
Installation |
1. |
Install the bulb to the rear turn signal lamp assembly. |
2. |
Install the rear turn signal lamp to the rear bumper. |
1. |
Install the door mirror turn signal lamp to the door mirror. |
2. |
Install the door mirror. |
3. |
Connect the battery terminal (-). |
ESC OFF Switch: Description and Operation
Description
1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged. ...
Carry emergency equipment
Depending on the severity of the weather, you should carry appropriate emergency
equipment. Some of the items you may want to carry include, tow straps or chains,
flashlight, emergency flares, san ...