Kia Sportage: Room Lamp: Repair procedures - Lighting System - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Room Lamp: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Lighting System / Room Lamp: Repair procedures

Inspection
1.
Remove the room lamp assembly connector then check for continuity between terminals.

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.

   
Take care not to damage the part (B).
3.
Loosen the fixing screws (2EA).
4.
Remove the room lamp assembly (A) after disconnecting the connector (B).

Installation
1.
Install the room lamp assembly after connecting the lamp connector.
2.
Install the lamp lens after assembling the bulb.
Turn Signal Lamp: Repair procedures
Removal Rear Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to BD group - "Rear Bumper") 3. Disconnect the connector. Remove the rear ...

Overhead Console Lamp: Repair procedures
Inspection Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. No.DescriptionNo.Descrip ...

Other Information:

Temperature Control Actuator: Description and Operation
Description 1. Heater unit includes mode control actuator and temperature control actuator. 2. Temperature control actuator is located at the heater unit. It regulates the temperature by the ...

Cargo security screen
Use the cargo security screen to hide items stored in the cargo area. To use the cargo security screen, pull the handle backward and insert the edges into the slots. When not in use, place t ...

Categories


Copyright © www.kispmanual.com 2014-2024