Kia Sportage: Hazard Lamp Switch: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Lighting System / Hazard Lamp Switch: Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the center fascia panel (A).
(Refer to BE group - "Audio unit")
|
| 3. |
Disconnect the hazard switch unit connector (A).
|
| 4. |
If the hazard lamp switch is not as specified, replace it carefully and take care not to damage the hook (A).
|
| Installation |
| 1. |
Connect the hazard switch connector. |
| 2. |
Install the hazard switch assembly to the center fascia panel. |
| Inspection |
| 1. |
Operate the switch and check for continuity between terminals with an ohmmeter.
|
Overhead Console Lamp: Repair procedures
Inspection
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
No.DescriptionNo.Descrip ...
Rheostat: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Remove the crash pad side switch assembly (A) af ...
Other Information:
Pressure Sensor: Repair procedures
Inspection
If you have trouble code related to the pressure sensor
(P1825, P1826, P1827, P1828), check pressure sensor according to the
inspection process.
Pre ...
Emission control system
The emission control system of your vehicle is covered by a written limited warranty.
Please see the warranty information contained in the Warranty & Maintenance booklet
in your vehicle.
Your ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024