Inspection |
1. |
With the fog lamp switch in each position, make sure that
continuity exists between the terminals below. If continuity is not as
specified, replace the multifunction switch. |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper.
(Refer to the BD group - "Front bumper") |
3. |
Remove the front fog lamp (A) by turning in the counterclockwise direction after disconnecting the connector. |
4. |
Remove the front fog lamp (B) after loosening the screws. |
Installation |
1. |
Install the front fog lamp bulb. |
2. |
Connect the front fog lamp connector. |
3. |
Install the front bumper. |
To set cruise control speed
1.Push the cruise ON-OFF button on the steering wheel, to turn the system on.
The CRUISE indicator light in the instrument cluster will illuminate.
2.Accelerate to the desired speed, which must b ...
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate). Press the button again to turn the air conditioning system off. ...