Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the lens (A) and license lamp (B) after loosening 2 screws. |
Installation |
1. |
Install the bulb. |
2. |
Install the license lamp lens. |
Troubleshooting
Trouble Shooting
Ignition System
SymptomSuspect areaRemedyEngine will not start or is hard to start (Cranks OK)Ignition lock switchInspect ignition lock switch, or replace as requiredIgnition co ...
Rear camera display
The Rear camera display will activate when the back up light is ON with the ignition
switch ON and the shift lever in the R (Reverse) position.
This system is a supplemental system that shows beh ...