Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Loose screws (2EA) holding the rear combination lamp then
disconnect the connector (A) then remove the outside rear combination
lamp (B). |
3. |
Turn the socket counterclockwise to remove the tail/stop lamp bulb (A). |
4. |
Loosen the nuts (A) after removing the tailgate lamp cover. |
5. |
Remove the tailgate lamp after disconnecting the connector (B). |
6. |
Turn the socket counterclockwise to remove the back up lamp bulb (A) and tail lamp bulb (B). |
7. |
If the bulbs should be only replaced without removing lamp
assembly, replace the back up lamp bulb (A) and tail lamp bulb (B) after
removing the tailgate lamp cover inside tailgate. |
Installation |
1. |
Install the tailgate combination lamp assembly after assembling the bulb. |
2. |
Install the lamp cover to the tailgate after connecting the lamp connector. |
3. |
Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector. |
If you do decide to pull a trailer
Here are some important points if you decide to pull a trailer:
Consider using a sway control. You can ask a hitch dealer about sway control.
Do not do any towing with your car during its first ...
Interior light
Do not use the interior lights for extended periods when the engine is not running.
It may cause battery discharge.
WARNING - Interior light
Do not use the interior lights when driving in the d ...