Kia Sportage: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Auto Lighting Control System / Description and Operation
| Description |
This function describes the following features
| – |
Input detection by Auto Light Sensor. |
| – |
Generate Auto Light Out Status data. |
| – |
Send Auto Light Out Status. |
| – |
Tail Lamp Control by Auto light Mode. |
| – |
Head Lamp Low Control by Auto light Mode. |
| – |
AV Tail Control by Auto Light sensor level. |
| • |
Auto Light Mode State Diagram is based on Auto Light Sensor''s level. |
| • |
Power condition of Auto Light Action |
| – |
When ACC, IGN, START terminal states, Auto Light Sensor operates. |
Schematic Diagrams
Circuit Diagram
...
Auto Light Sensor: Repair procedures
Inspection
In the state of IGN1 ON, when multi function switch module
detects auto light switch on, tail lamp relay output and head lamp low
relay output are controlled according to auto light ...
Other Information:
Electric power steering (EPS) system warning light
This indicator light comes on after the ignition key is turned to the ON position
and then it will go out after the engine is started.
This light also comes on when the EPS has some troubles. If ...
Transmitter: Repair procedures
Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check voltage if the red light doesn''t flicker ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024