Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad") |
3. |
Remove the steering column assembly.
(Refer to the ST group - "steering column & shaft") |
4. |
Disconnect the connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening a bolt.
[USA]
[Canada]
Disconnect the connector of the SMARTRA unit(A) and then remove the bracket and immobilizer unit. |
Installation |
1. |
Install the immobilizer control unit after connecting the unit connector. |
2. |
Install the steering column assembly. |
3. |
Install the crash pad lower panel. |
35R Clutch Control Solenoid Valve(35R/C_VFS): Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct (A).
3.
Remove the air cleaner assembly.
(1)
Disconnect the breather hose (A) and brake booster intensifier hose.
(2)
...
Battery: Components and Components Location
Components
1. Battery insulation pad2. Battery3. Battery tray4. ECM & bracket assembly5. Battery mounting bracket
...