Kia Sportage: Antenna Coil: Repair procedures - Immobilizer System - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Antenna Coil: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Immobilizer System / Antenna Coil: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A).

   
Take care not to damage and scratch the shrouds and its related parts.
Take care not to damage the hook when removing the upper and lower shrouds.
3.
Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A).

Installation
1.
Install the coil antenna and connect the 6P connector.
2.
Install the steering column upper and lower shrouds.
Immobilizer Control Unit: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the steering column assembly. (Refer to the ...

Troubleshooting
Diagnosis Of Immobilizer Faults – Communication between the ECM and the SMARTRA. – Function of the SMARTRA and the transponder. – Data (stored in the ECM related to the i ...

Other Information:

Folding the rear seat
The rear seatbacks can be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle. WARNING Never allow passengers to sit on top of the folded down seatback ...

Troubleshooting
TPMS Inspection method Inspection     Find the inspection number by referring to the table above. The following content is irrelevant of the inspection procedure. 1. ...

Categories


Copyright © www.kispmanual.com 2014-2024