Removal |
1. |
Lift up the vehicle.
(Refer to GI group - "Lift and support points") |
2. |
Remove the rear bumper.
(Refer to the BD group - "Rear bumper") |
3. |
Pull out the sensor by opening the sensor holder out. |
4. |
Disconnect the connector from the ultrasonic sensor. |
Installation |
1. |
Install the sensor and connector. |
Troubleshooting
Engine Overheat Troubleshooting
Inspection RemedyVisual inspectionInspect for shortage of coolant in reservoir tank .Reinspect after replenishing coolant.Inspect for coolant pollution after remo ...
Rear Wheel Speed Sensor: Components and Components Location
Components
1. Rear wheel speed sensor connector2. Rear wheel speed sensor
...