Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the cluster fascia panel.
(Refer to the BD group - "Crash pad") |
3. |
Disconnect the connector (A). |
4. |
Remove the start/stop button (A) after loosening the mounting 3 screws. |
Installation |
1. |
Install the start/stop button. |
2. |
Install the left air vent. |
Schematic Diagrams
Schematic Diagram
...
Ventilation
1.Set the mode to the position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired ...