Removal |
1. |
Remove the tailgate trim in the trunk after removing the screws and clips.
(Refer to the BD group - "Tailgate") |
2. |
Remove the tailgate garnish (A) after disconnecting the connector and removing the bolts. |
3. |
Remove the back view camera (A) after loosening the screws (2EA). |
Installation |
1. |
Install the back view camera. |
2. |
Install the tailgate garnish and trim. |
Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold.
· At Cold Engine [Engine Coolant Temperatur ...
Description and Operation
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF"
main switch located on right of steering wheel column. The system has
the capability to cruise, coast, accelerate and ...