Inspection |
1. |
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent,
gently bend them using a screwdriver or pliers. |
2. |
Check the condenser connections for leakage, and repair or replace it, if required. |
Replacement |
1. |
Recover the refrigerant with a recovery/ recycling/ charging station. |
2. |
Disconnect the negative (-) battery terminal. |
3. |
Remove the front bumper upper cover (A). |
4. |
Remove the discharge line and liquid line (A) from the condenser. |
5. |
Remove the intercooler cover (A). |
6. |
Remove the condenser side cover (A). |
7. |
Remove the condenser (A) from radiator. |
8. |
Install in the reverse order of removal, and note these items :
|
Use approved window washer anti-freeze in system
To keep the water in the window washer system from freezing, add an approved
window washer anti-freeze solution in accordance with instructions on the container.
Window washer anti-freeze is avail ...
Specifications
Specification
ItemDescriptionPower source3VOperating temperature-20°C ~ +60°CRF ModulationFSKRF frequency433.92MHzBattery1EA (CR2032)
An inappropriately disposed bat ...