Inspection |
1. |
Ignition "OFF". |
2. |
Disconnect evaporator temperature sensor. |
3. |
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Specification
|
Replacement |
1. |
Remove the console extension cover (A). |
2. |
Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a clockwise direction. |
3. |
Installation is the reverse order of removal. |
Purge Control Solenoid Valve (PCSV): Specifications
Specification
ItemSpecificationCoil Resistance (?)19.0 ~ 22.0 [20°C(68°F)]
...
Power outlet
Front
Rear
The power outlet is designed to provide power for mobile telephones or other
devices designed to operate with vehicle electrical systems. The devices should
draw less than 10 amps ...