Inspection |
1. |
Ignition "ON" |
2. |
Using the scan tool. |
3. |
Emit intensive light toward photo sensor using a lamp, and check the output voltage change. |
4. |
The voltage will rise with higher intensive light and reduce with lower intensive light.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
With the (-) driver, remove the photo sensor (A) from the center of defrost nozzle. |
3. |
Install in the reverse order of removal. |
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative impact on the air conditioning system.
Therefore, if abnormal operation is ...
OFF
• With automatic transaxle
To turn off the engine (START/RUN position) or vehicle power (ON position), press
the ENGINE START/STOP button with the shift lever in the P (Park) position. When
you ...