Kia Sportage: Ambient Sensor: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Sensor: Description and Operation
| Description |
| 1. |
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor; resistance will increase with lower temperature, and
decrease with higher temperatures. |
| 2. |
The sensor output will be used for discharge temperature
control, temperature regulation door control, blower motor level
control, mix mode control and in-car humidity control.
|
Photo Sensor: Repair procedures
Inspection
1.
Ignition "ON"
2.
Using the scan tool.
3.
Emit intensive light toward photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher ...
Ambient Sensor: Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient temperature sensor between
terminals 1 and 2 whether it is changed by changing o ...
Other Information:
Side Impact Sensor (SIS): Repair procedures
Removal
Pressure Side Impact Sensor
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before ...
4WD LOCK indicator
The 4WD LOCK indicator light is illuminated when the 4WD LOCK button is pushed.
The purpose of this 4WD LOCK mode is to increase the drive power when driving on
wet pavement, snow-covered roads ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024