Kia Sportage: Blower Unit: Components and Components Location - Blower - Heating,Ventilation, Air Conditioning - Kia Sportage SL Service & Repair ManualKia Sportage: Blower Unit: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Unit: Components and Components Location

Component Location

Components

1. Intake case (LH)
2. Intake case (RH)
3. Blower motor
4. Intake door
5. Intake actuator
6. Mofet [Auto type]
7. Resistor [Manual type]
8. Climate control air filter cover
9. Climate control air filter
10. Ionizer
11. Blower case (Upper)
12. Blower case (Lower)
13. Intake seal

Blower
...

Blower Unit: Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater blower unit. (Refer to HA group - "Heater Unit") 3. Remove the heater blower unit (A) fro ...

Other Information:

Climate control air filter
Filter inspection The climate control air filter should be replaced according to the maintenance schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a ...

Repair procedures
Operation and Leakage Check Check all of the following items: ComponentProcedureBrake Booster (A)Check brake operation by applying the brakes during a test drive. If the brakes seem hard to ...

Categories


Copyright © www.kispmanual.com 2014-2024