Inspection |
1. |
Connect the battery voltage and check the blower motor rotation. |
2. |
If the blower motor is not operating when voltage is applied,
substitute with a known-good blower motor and check for proper
operation. |
3. |
If the problem is corrected, replace the blower motor. |
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Disconnect the connector (A) of the blower motor. |
3. |
Remove the blower motor (B) after loosening the mounting screws. |
4. |
Installation is the reverse order of removal. |
Parking light position
When the light switch is in the parking light position (1st position), the tail,
license and instrument panel lights will turn ON. ...
Starter: Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Remove the ...