Inspection |
1. |
Ignition "ON" |
2. |
Manually operate the control switch and measure the voltage of blower motor. |
3. |
Select the control switch to raise voltage until high speed.
Specification
*AUTO COOLING : Auto speed (4.5V~B+)
*AUTO HEATING : Auto speed (4.5V~11.0V) |
4. |
If the measured voltage is not specification, substitute with a known-good power mosfet and check for proper operation. |
5. |
If the problem is corrected, replace the power mosfet. |
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Disconnect the power mosfet connector (A) and then remove the power mosfet (B) after loosening the mounting screws. |
3. |
Installation is the reverse order of removal. |
Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you
drive and when you drive.
Each of these factors affects how many kilometers (miles) you can get from a
liter (ga ...
Flow Diagram
Power Flow Chart
P,NUD/BLR/B26/B35R/COD/COWC?
? Direction of Rotation
?Lower & Reverse Brake (LR/B) Activation > Overdrive (O/D) Hub Lock > Mid & Rear P/C Lock
?Input Shaft Rotatio ...