Replacement |
1. |
Disconnect the damper (B) and glove box lift (C) from the glove box (A). |
2. |
Remove the filter cover with pushing the knob. |
3. |
Replace the air filter (B), install it after making sure of the direction of air filter.
|
4. |
Installation is the reverse order of removal. |
Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is
armed.
A front or rear door is opened without using the ignition key or transmitter
(or smart key).
The tailga ...
4WD LOCK indicator
The 4WD LOCK indicator light is illuminated when the 4WD LOCK button is pushed.
The purpose of this 4WD LOCK mode is to increase the drive power when driving on
wet pavement, snow-covered roads ...