Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Using the screwdriver, remove the cluster facia panel (A). |
3. |
Using the screwdriver, remove the crash pad garnish (A). |
4. |
Using the screwdriver, remove the screws and center facia panel (A). |
5. |
Disconnect the center facia connectors (A). |
6. |
Loosen the control panel mounting screws and then remove the control panel (A). |
7. |
Disconnect the connectors and then remove the control panel(B). |
8. |
Installation is the reverse order of removal. |
Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual
speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE
The first few ...
General Safety Information and Caution
Precautions
General Precautions
Please read the following precautions carefully before performing the airbag system service.
Observe the instructions described in this manual, or the airbags c ...