The FLEX Steer controls steering effort as driver's preference or road condition.
You can select the desired steering mode by pressing the FLEX Steer button.
The FLEX Steer stays in the last mode selected when turning the engine on.
When the steering mode button is pressed, the selected steering mode will appear on the LCD display.
If the steering mode button is pressed within 4 seconds, the steering mode will change as above pictures.
If the steering wheel mode button is not pressed for about 4 seconds, the LCD display will change to the previous screen.
TPMS Sensor: Description and Operation
Description
1.
Mode
(1)
Normal Fixed Base State
•
Sensor transmissions continue at the Low Line (Base)
configuration defined rates until the state is either changed by LF
command or ...
Refrigerant line: Repair procedures
Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
Cap the open fittings immediately to keep moisture or dirt out of ...