The 4WD LOCK indicator light is illuminated when the 4WD LOCK button is pushed. The purpose of this 4WD LOCK mode is to increase the drive power when driving on wet pavement, snow-covered roads and/or off-road. The 4WD LOCK indicator light is turned off by pushing the button again.
CAUTION - 4WD lock mode
Do not use 4WD LOCK mode on dry paved roads or highway, it can cause noise, vibration or damage of 4WD related parts.
Rear window wiper/washer
D : Rear wiper control
· ON – Continuous wipe
· INT* – Intermittent wipe
· OFF – Off
E :Wash with brief wipes (rear)* ...
ICM (Integrated Circuit Module) Relay Box: Repair procedures
Inspection
Rear Wiper Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.11 in the A and
No.12 in the A terminals when power and ground are connect ...