When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.
A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, body-to-tire clearance, snow chain clearance, speedometer and odometer calibration, headlight aim and bumper height.
Front Driveshaft: Components and Components Location
Components
1. Front driveshaft (LH)2. inner shaft3. Front driveshaft (RH)
1. Split pin2. Castle nut3. washer4. BJ assembly5. Clip A6. BJ boot band7. BJ boot8. Dynamic damper band9. Dynamic d ...
High Pressure Fuel Pump: Repair procedures
Removal
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pre ...