Kia Sportage: Engine compartment fuse replacement
1.Turn the ignition switch and all other switches off.
2.Remove the fuse panel cover by pressing the tab and pulling the cover up. When the blade type fuse is disconnected, remove it by using the clip designed for changing fuses located in the engine room fuse box. Upon removal, securely insert reserve fuse of equal quantity.
3.Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
4.Push in a new fuse of the same rating, and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized Kia dealer.
CAUTION - Fuse panel covers
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water contact.
Memory fuse
Your vehicle is equipped with a memory fuse to prevent battery discharge if your
vehicle is parked without being operated for prolonged periods. Use the following
procedures before parking the v ...
Main fuse and multi fuse
If the main fuse and multi fuse is blown, it must be removed as follows:
1.Disconnect the negative battery cable.
2.Remove the nuts shown in the picture above.
3.Replace the fuse with a new one o ...
Other Information:
Headlight welcome function
When the headlight switch is in the ON or AUTO position and all doors (and tailgate)
are closed and locked, if you press the door unlock button on the transmitter (or
smart key), the headlights wi ...
Driving on grades
Reduce speed and shift to a lower gear before you start down a long or steep
downgrade. If you don’t shift down, you might have to use your brakes so much that
they would get hot and no longer ope ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual