Kia Sportage: Radiator: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Mechanical System / Cooling System / Radiator: Components and Components Location

Coolant: Repair procedures

Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the rad ...

Radiator: Repair procedures

Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58kPa (0.95 ~ 1.25kg ...

Other Information:

Repair procedures
On-vehicle Inspection Spark Test 1. Disconnect the ignition coil connectors (A). 2. Remove the ignition coils (A). 3. Using a spark plug socket, remove the spark plug. 4. Install th ...

Timing Chain: Repair procedures
Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector ...