Inspection |
1. |
Remove the fuse box cover. |
2. |
Remove the starter relay (A). |
3. |
Using an ohmmeter, check that there is continuity between each terminal.
|
4. |
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87. |
5. |
If there is no continuity, replace the starter relay. |
6. |
Install the starter relay. |
7. |
Install the fuse box cover. |
Caring for disc
If the temperature inside the car is too high, open the car windows to ventilate
before using the system.
It is illegal to copy and use MP3/WMA files without permission. Use CDs
that are cr ...
Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary.
Also check all ignition wiring and components to be sure they are not cracked, worn
or damaged in any way. ...