Removal |
1. |
Remove the fuel tank. (Refer to "Fuel tank" in FL group.) |
2. |
Disconnect the vapor tube quick-connector (B) and the ventilation hose (A). |
3. |
Remove the canister in the direction of an arrow after removing the installation screws (C). |
Inspection |
1. |
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube
A: Canister - Atmosphere
B: Canister - Intake Manifold
C: Canister - Fuel Tank
|
Installation |
Canister installation screw:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft) |
Towing up hill
When towing a trailer on steep grades (in excess of 6%) pay close attention
to the engine coolant temperature gauge to ensure the engine does not overheat.
If the needle of the coolant temper ...
Vehicle stability management (VSM)
This system provides further enhancements to vehicle stability and steering responses
when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient
of friction between ...