Inspection |
1. |
Connect the GDS on the Data Link Connector (DLC). |
2. |
Measure the output voltage of the MAPS at idle and IG ON.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the manifold absolute pressure sensor connector (A). |
3. |
Remove the installation bolts (B), and then remove the sensor from the surge tank.
[MAPS #1]
[MAPS #2] |
Installation |
|
|
1. |
Installation is reverse of removal.
|
Components and Components Location
Components Location
1. Fuel tank2. Fuel pump3. Fuel filter4. Fuel pressure regulator5. Canister6. Fuel tank air filter7. Fuel tank band 8. Fuel tank pressure sensor (FTPS) 9. Canister close ...
Description and Operation
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF"
main switch located on right of steering wheel column. The system has
the capability to cruise, coast, accelerate and ...