Kia Sportage: Crankshaft Position Sensor (CKPS): Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS): Description and Operation
| Description |
Crankshaft Position Sensor (CKPS) detects the crankshaft
position and is one of the most important sensors of the engine control
system. If there is no CKPS signal input, the engine may stop because of
CKPS signal missing. This sensor is installed on the cylinder block or
the transaxle housing and generates alternating current by magnetic flux
field which is made by the sensor and the target wheel when engine
runs.
The target wheel consists of 58 slots and 2 missing slots on 360 degrees CA (Crank Angle).
Engine Coolant Temperature Sensor (ECTS): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECT ...
Crankshaft Position Sensor (CKPS): Troubleshooting
Wave Form
...
Other Information:
Crankshaft Position Sensor (CKPS): Schematic Diagrams
Circuit Diagram
...
If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine will probably be too hot. If this happens,
you should:
1.Pull off the ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024